Areco

Oklahoma Vertical Well Re-Perf

Areco2022-10-13T21:02:54+00:00Case Studies, Resources|

After being on production for approximately two years, this vertical well located in Oklahoma [...]

Areco2022-10-13T21:04:37+00:00Case Studies, Resources|

A vertical stage completion was in a tight carbonate with average porosity ~ 3%. [...]

Areco2022-10-13T21:05:16+00:00Resources, Testing|

Tests in a simulated tunnel were conducted to measure the pressure released [...]

Areco2022-10-13T21:05:33+00:00Resources, Testing|

Recently, Areco Technology Inc. conducted a Section II Flow Lab Test at Halliburton Jet [...]

Areco2022-10-13T21:06:44+00:00Case Studies, Resources|

From 2009 to 2012, Ganguyi Oilfield selected wells on the same pad and conducted [...]

Areco2022-10-13T21:07:18+00:00Resources, Testing|

For this test, standard API concrete targets were perforated with conventional and CoFrac® System measuring [...]

Areco2022-10-13T21:07:54+00:00Resources, Testing|

For this test, two identical sandstone targets were prepared. A test apparatus was configured to [...]

Areco2022-10-13T21:09:09+00:00Resources, Testing|

Conducted at the Explosive Test Center at North Schlumberger Oilfield Technology Corporation to identify the [...]

Areco2022-10-13T21:13:06+00:00Resources, Testing|

A test was set up to verify that propellant deflagrated outside the gun carrier [...]